11 Solutions To Fix Unresponsive Touch Screen Android

11 Solutions To Fix Unresponsive Touch Screen Android

If your Android device’s touchscreen is unresponsive or not working properly, there are a few things you can do to try and fix the issue. This article will outline the most common solutions and how to try each one. Hopefully, by following these steps you will be able to get your touchscreen working again without having to take your device to a repair shop.

Fix a screen that isn’t working right on Android

If your touchscreen is not responding at all, the first step is to remove any adhesives or stickers that might be preventing it from working. Try using a soft cloth or paper towel to gently clean off any residue and then use an alcohol-based cleaning agent like rubbing alcohol to help loosen up any glue particles. Once everything has been cleaned off, dry the screen thoroughly before applying another layer of adhesive if necessary.

Solution 1: Use Android Repair Tool to Fix Touch Screen Not Working on Android

If your Android device’s touchscreen is not responding, one option is to try and fix the issue using the Android Repair Tool. This app allows users to access a wide variety of repair tools that can be used to fix various issues with their device. After downloading and installing the app, open it up and select “Touchscreen” from the left menu.

Solution 2: Power Cycling/Restart The Device

Another solution is to power cycle or restart the device. This will sometimes reset the touchscreen and help fix any issues that are causing it not to work properly. To do this, turn off your Android device by pressing and holding the Volume Down button and Power Button at the same time until you see a screen that says “Android is ready.” Then, release both buttons. Once your Android device has shut down, wait a few minutes before trying to use it.

Solution 3: Remove Memory Card & SIM Card

If your touchscreen is not responding and you have removed the memory card and SIM card, one option is to try and fix the issue by reinstalling them. To do this, remove the battery cover of your Android device and insert a SIM card (if applicable) followed by a memory card. Once both cards are in place, replace the battery cover and turn on your Android device. If you’re using a Verizon phone, press Menu > Settings > Wireless & networks > Mobile Networks. If you’re using a Sprint phone, press Menu > Settings > Wireless & networks > Wi-Fi. Under “Access point names,” tap the three lines in the top left corner and then select “New APN.” Enter mobile.attbikspaing into the provided field and then press Save. Finally, enter attwifi as your new default wireless network name and tap Save again to complete the process.

Solution 4: Perform a Battery Pull

One last solution is to perform a battery pull. This is done by turning off your Android device and then removing the battery. Once the battery has been removed, hold down both power and volume up buttons until you see an “Android is ready” screen. Release both buttons and plug in your Android device to AC power source. After approximately 20 minutes have passed, try using your touchscreen again; if the issue persists, you may need to do a complete battery pull.

Solution 5: Remove Screen Protector

If your touchscreen is not responding and the issue appears to be related to a screen protector, you may need to remove it. To do this, make sure your Android device is turned off and then use a pair of sharp scissors or an exacto knife to carefully cut around the edge of the screen protector. After cutting away the PROTECTOR layer, peel off any adhesive residue and replace with a new one if necessary.

Solution 6: Control Phone With Facial or Voice Movements

If none of the solutions above work, you may need to control your Android device with facial or voice movements. To do this, open the Settings app and tap General > Accessibility. Under “Personal Assistance,” select Voice Control and enable it by tapping OK. Now launch a compatible app such as Google Maps, Double Tap Backscreen (for Huawei Honor 7 users), or Swype Pro (Samsung Galaxy S6 users) and start using your face or hands to play with the navigation controls.

Solution 7: Boot Your Device To Safe Mode

If none of the above solutions work, you may need to boot your Android device into safe mode. To do this, first turn off your device and then press and hold both the power button and volume down button until you see an “Android is ready” screen. Release both buttons and connect your Android device to AC power source. Once it’s turned on again, press and hold the power button until you see a “safe mode” screen; release the button and tap OK to start the safe mode.

Solution 8: Install an Anti-Malware or Anti-virus Application

If none of the above solutions work, you may need to install an anti-malware or anti-virus application. To do this, go to your Android device’s App Store and search for an app that “protects against malware.” After installing the app, make sure it runs continuously in the background and takes note of any suspicious activity on your device.

Solution 9: Calibrate Touch Screen on Android with Apps

If none of the above solutions work, you may need to calibrate your Android device’s touch screen with apps. To do this, open an app that lets you adjust the touchscreen calibration such as Screen Calibrator (Android 4.4 and 5.0) or Touch Guide (iOS devices). After adjusting the touchscreen calibration, make sure to restart your Android device for the changes to take effect.

Solution 10: Diagnose the Phone Display

If none of the above solutions work, you may need to diagnose the phone display. To do this, first turn off your phone and then remove the battery. After removing the battery, press and hold both volume up button and power button until you see a “Android is ready” screen. Release both buttons and connect your phone to AC power source using an appropriate cable. Once it’s turned on again, press and hold the power button until Lenovo logo appears on the screen; release the button and tap OK to start the safe mode.

Solution 11: Factory Reset Android Device in Recovery Mode

If none of the above solutions work, you may need to factory reset your Android device in recovery mode. To do this, turn off your phone and then remove the battery. After removing the battery, press and hold both volume up button and power button until you see a “Android is ready” screen. Release both buttons and connect your phone to AC power source using an appropriate cable. Once it’s turned on again, press Volume Down + Power button until you see a “Factory reset” screen. Tap Reset device and then tap Erase everything to confirm.

Frequently Ask Questions

What can cause the iphone home button to stop working?

There are a few things that can cause the home button on an iPhone to stop working. The most common is a loose connection between the phone and the Home Button Sensor. If you experience this problem, you can try to re-connect the phone by following these steps:
1. Remove the back cover of the iPhone.
2. Locate and remove the Home Button Sensor from the phone.
3. Reconnect the Home Button Sensor to the phone by aligning the holes on the sensor with those on the phone.
4. Replace the back cover of the phone.
If this does not fix the problem, you may need to replace the Home Button Sensor. You can purchase a new Home Button Sensor from Apple or an authorized service provider.

How do I solve the problem of slow or frozen screen Kindle In android?

There are a few things that you can do to help solve the problem of slow or frozen screens on your Kindle. First, make sure that you have a fast internet connection. If you are still experiencing slow or frozen screens, you may need to reset your Kindle. To do this, locate the Kindle icon on your home screen and select “Reset Your Kindle.” If that doesn’t solve the problem, you may need to download a different Kindle app. There are a variety of apps available on the Amazon App Store, and some are designed to speed up your Kindle.
If all of these solutions fail, you can try to backup your Kindle content to your computer and restore it if needed. To do this, connect your Kindle to your computer using the USB cable and launch the “Kindle for PC” application. Next, choose “Backup and Restore” from the menu and enter your Kindle’s password.

What causes unresponsive touch screen?

The most common cause of unresponsive touch screen is moisture. When moisture gets on the touch screen, it causes the screen to become unresponsive. This can be caused by rain, humidity, sweat, or any other moisture-containing substance. In order to restore touch screen functionality, you will need to remove all of the moisture and then apply a dry screen protector.
If the issue is caused by a broken screen, the best course of action is to bring the device to a repair shop. If the issue is caused by a software issue, you will need to update the software.

Conclusion

If you’re struggling to get your Android phone to respond to your touch, there is a good chance that you are facing an unresponsive touch screen issue. Fixing this can be a bit of a challenge, but by following our guide you should be able to get your phone back to its responsive self in no time. If you have any other questions or concerns about Android phone functionality, don’t hesitate to reach out to us by leaving a comment down below!

You may also like: Top 34 Best Mobile Covers